LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Mechanical - 3.6L (LGX) - Repair Instructions) >> Repair Instructions >> Cylinder Head Cleaning and Inspection >> Cleaning Procedure

Cleaning Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Ensure proper use of room temperature vulcanizing (RTV) sealant. Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
  2. Remove any old thread sealant, gasket material or sealant using EN - 28410  Gasket Remover.
  3. Clean all cylinder head surfaces with non-corrosive solvent.
    4. WARNING:

    Refer to Safety Glasses Warning .

  4. Blow out all the oil galleries using compressed air.
  5. Remove any carbon deposits from the combustion chambers using the GE - 8358  Carbon Removal Brush.
  6. Clean any debris or build-up from the lifter pockets.
scientia non olet · About LEMON Manuals