LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Mechanical - 3.6L (LGX) - Repair Instructions) >> Repair Instructions >> Clutch Pilot Bearing Removal

Clutch Pilot Bearing Removal

WARNING: This page is about a different variant/trim than selected.
GM4017627Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 Clutch Pilot Bearing

Procedure

  1. Install - GE-23907  Slide Hammer with Bearing Adapter
  2. Remove and DISCARD - Clutch Pilot Bearing
  3. Remove - GE-23907  Slide Hammer with Bearing Adapter

Special Tools 
GE-23907  Slide Hammer with Bearing Adapter
Equivalent regional tools: Special Tools
scientia non olet · About LEMON Manuals