Oil Pump Timing Chain Installation
WARNING: This page is about a different variant/trim than selected.
Oil Pump Timing Chain Installation
| Callout | Component Name |
|---|---|
| 1 | Oil Pump Timing Chain
NOTE:
Timing of the oil pump to the engine is not required. The colored links on the oil pump drive chain and timing mark on the oil pump drive sprocket are for production use only. |
| 2 | Crankshaft Sprocket |
| 3 | Oil Pump Sprocket Procedure Use a suitable wrench to hold the sprocket to torque the bolt. |
| 4 | Oil Pump Drive Bolt Procedure Install a NEW bolt. Do NOT reuse the old bolt. Tighten in sequence
|