Inspection Procedure Right Camshaft Carrier
WARNING: This page is about a different variant/trim than selected.
- Inspect the camshaft carrier for the following conditions:
- Damage to the camshaft bearing cap bolt holes (1)
- Damage to the camshaft carrier bolt holes (2)
- Damage to the top sealing surface (3)
- Damage to the camshaft bearing cap bolt holes (4)
- Damage to the engine oil manifold check valve mounting areas (5)
- Damage to the bottom sealing surface (6)
- Damage to the camshafts mounting surface areas (7)
- Damage to the camshaft position actuator solenoid valve holes (8)
- Repair or replace the camshaft carrier as necessary.