Automatic Transmission Flex Plate Replacement
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Transmission Replacement (M5T with LTG) Special Tools EN 46106 Flywheel Holding Tool Equivalent regional tools: Special Tools . |
|
| 1 | Automatic Transmission Flex Plate Fastener [8x]
CAUTION:
Refer to Fastener Caution .
CAUTION:
This vehicle is equipped with torque-to-yield or single use fasteners. Install a NEW torque-to-yield or single use fastener when installing this component. Failure to replace the torque-to-yield or single use fastener could cause damage to the vehicle or component. Procedure Install NEW bolts. Do NOT reuse old bolts. Tighten
NOTE:
NEW bolts must be used whenever removing the automatic transmission flex plate. |
| 2 | Automatic Transmission Flex Plate Procedure Automatic Transmission Flex Plate Cleaning and Inspection . |