Engine Rear Noise Shield Replacement

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Heater Inlet And Outlet Pipe Replacement (LGX)
1	Engine Rear Noise Shield WARNING: The noise cancelling foam component MUST be replaced if it has been exposed to engine fluids. Failure to replace the noise cancelling foam component that has been exposed to engine fluids may result in an engine fire resulting in catastrophic engine damage, and possible injury or death. Unsnap the engine noise shield from the rear of the engine. NOTE: The engine noise shield snaps into place.

Callout

Component Name

Preliminary Procedure
Heater Inlet And Outlet Pipe Replacement (LGX)

Engine Rear Noise Shield

WARNING:

The noise cancelling foam component MUST be replaced if it has been exposed to engine fluids. Failure to replace the noise cancelling foam component that has been exposed to engine fluids may result in an engine fire resulting in catastrophic engine damage, and possible injury or death.

Unsnap the engine noise shield from the rear of the engine.

NOTE:

The engine noise shield snaps into place.