Camshaft Position Actuator Locating Pin Control Valve Replacement (Bank 1)
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Air Cleaner Outlet Duct Replacement |
|
| 1 | Electrical Connector |
| 2 | Camshaft Position Actuator Locating Pin Control Valve Bolt
CAUTION:
Refer to Fastener Caution . Tighten 10 N.m (89 lb in) |
| 3 | Camshaft Position Actuator Locating Pin Control Valve |
| 4 | Camshaft Position Actuator Solenoid Valve Seal Procedure Inspect the Camshaft Position Actuator Solenoid Valve Seal and replace as necessary.
NOTE:
The seal is reusable, inspect the seal and replace if damaged. |