LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Controls And Fuel - 3.6L (LGX) - Diagnostic Information And Procedures (P0443 - P3400) And Symptoms) >> Diagnostic Information and Procedures >> Inspection/Maintenance Complete System Set Procedure >> Description

Inspection/Maintenance Complete System Set Procedure: Description

WARNING: This page is about a different variant/trim than selected.

The purpose of the Inspection/Maintenance (I/M) complete system set procedure is to satisfy the enable criteria necessary to execute all of the I/M readiness diagnostics and complete the trips for those particular diagnostics. When all I/M monitored diagnostic tests are completed, the I/M System Status indicators are set to YES. Perform the Inspection/Maintenance (I/M) Complete System Set Procedure if any I/M System Status indicators are set to NO.

scientia non olet · About LEMON Manuals