Conditions for Running the DTC

• DTC P0068, P0101, P0102, P0103, P0112, P0113, P0116, P0117, P0118, P0121, P0122, P0123, P0128, P0171, P0172, P0174, P0175, P0201-P0208, P0222, P0223, P0300 - P0308, P0351 - P0358, P0461 - P0463, P0496, P0502, P0503, P0606, P0722, P0723, P0806-P0808, P1101, P1516, P2066 - P2068, P2101, P2135 = Not set
• Barometric Pressure = Greater than 70 kPa (10 PSI)
• { If equipped } Clutch Pedal = Not Pressed
• { If equipped } Clutch Pedal = EngagedLess than 25%
• { If equipped } Clutch Pedal = EngagedGreater than 88%
• Engine = Running - For greater than 1 min
• Engine = Idling - For greater than 5 s
• Engine Coolant Temperature = Greater than 60°C (140°F)
• Engine speed varies less than +/-25 RPM
• Ignition Voltage = 11 to 32 V
• Intake Air Temperature Sensor = Greater than -20°C (-4°F)
• Scan Tool Control Functions = Inactive
• Torque Converter Clutch = Inactive
• Transmission = Not Shifting
• Vehicle Speed = Less than 1. 6 km/h (1 MPH)

Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 10 s