Conditions for Running the DTC

P0601, P0602, P0604, P0605, P0607, P060A, P060B, P0610, P061C, P0630, P160A, P160D, P160E, P161C, P264F, P3191

• Ignition = On
• Frequency the DTC runs = Continuously - After the running conditions are met

P0603, P062F

• Ignition = On
• Frequency the DTC runs = Once - Per drive cycle - After the running conditions are met

P0606, P062B

• Run/Crank = Greater than 11 V
• Frequency the DTC runs = Continuously - After the running conditions are met

P064D, P064E, P134C, P27B5

• Battery Voltage = Greater than 11 V
• Engine = Running - Greater than 3 min

P026B, P16F3

• DTC P0101, P0102, P0103, P0106, P0107, P0108, P2227, P2228, P2229, P2230 = Not set
• Engine Speed. = Greater than 680 RPM
• Frequency the DTC runs = Continuously - After the running conditions are met

P2610, P262B

• Run/Crank = Inactive
• Frequency the DTC runs = Once - After ignition Off - After the running conditions are met - For 20 s