1-2-3-4-5 Clutch Releases

WARNING: This page is about a different variant/trim than selected.

1-2-3-4-5 Control Solenoid

The 1-2-3-4-5 control solenoid is signaled off allowing S2 VFS SIG fluid to exhaust. Spring pressure shifts the valve to allow 12345R CLUTCH fluid to exhaust into 12345R CLUTCH EX fluid circuit from the 12345R clutch boost and the 1-2-3-4-5 reverse clutch assembly housing.

1-2-3-4-5 Reverse Clutch Assembly

The 1-2-3-4-5 reverse clutch is released allowing 12345R CLUTCH fluid to exhaust thru the 1-2-3-4-5 reverse control solenoid.

1-2-3-4-5 Reverse Boost Solenoid

The 1-2-3-4-5 reverse boost solenoid is commanded off. This allows S9 ON/OFF BOOST SIGNAL fluid to exhaust through the 1-2-3-4-5 rev boost solenoid.

1-2-3-4-5 Reverse Clutch Boost Valve

The 12345R clutch boost valve spring force moves the valve to allow 12345 CL KNOCKDOWN fluid from the 1-2-3-4- 5 reverse clutch housing to exhaust into the 12345R clutch boost valve then into the EX BACKFILL fluid circuit.