Reaction Internal Gear and 1-2-3-4-5 Reverse Hub and 1-2-3-4-5 Reverse Clutch Plate Assembly Removal
WARNING: This page is about a different variant/trim than selected.
-
Fig 1: Exploded View Of Reaction Internal Gear and 1-2-3-4-5 Reverse Hub and 1-2-3-4-5 Reverse Clutch Plate Assembly Components
Courtesy of GENERAL MOTORS COMPANY
1-2-3-4-5-Reverse Clutch Hub Thrust Bearing (1) - Remove
- Reaction Internal Gear and 1-2-3-4-5-Reverse Hub (2) - Remove
- Reaction Carrier Thrust Bearing (3) - Remove
- 1-2-3-4-5-Reverse Clutch Backing Plate Retaining Ring (4) - Remove
- 1-2-3-4-5-Reverse Clutch Backing Plate (5) - Remove
- 1-2-3-4-5-Reverse Clutch Plate (6) - Remove [3x]
- 1-2-3-4-5-Reverse Clutch Plate (7) - Remove [2x]
- 1-2-3-4-5-Reverse Clutch Apply Plate (8) - Remove
- 1-2-3-4-5-Reverse Clutch Plate (Waved) (9) - Remove