Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P2227Condition 1
BARO & Calculated BARO = The actual value is not within a predetermined range of the calculated value.
Condition 2
BARO = Less than 50 kPa (7. 3 PSI)orGreater than 115 kPa (16. 7 PSI)
P2228
BARO = Less than 2 V - For greater than 5 s
P2229
BARO = Greater than 4. 5 V - For greater than 5 s
P2230
BARO = Signal noisy or erratic - For greater than 5 s