Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
DTC P2122, P2123, P2127, P2128
- DTC P0697, P06A3 = Not set
- Ignition = On or Engine Running
- Ignition Voltage = Greater than 6. 4 V
- Reduced Engine Power = Inactive
Frequency the DTC runs = Continuously - After the running conditions are met
DTC P2138
- DTC P0697, P06A3, P2122, P2123, P2127, P2128 = Not set
- Ignition = On or Engine Running
- Ignition Voltage = Greater than 6. 4 V
- Reduced Engine Power = Inactive
Frequency the DTC runs = Continuously - After the running conditions are met