LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (M/T Clutch) >> Diagnostic Information and Procedures >> Clutch - No Load

Clutch - No Load

WARNING: This page is about a different variant/trim than selected.
Cause Action
DEFINITION: Regardless of ambient temperature and vehicle on/off operational status, the clutch pedal effort is zero/light in both up-stroke and down-stroke and the clutch will not disengage.
Review Symptoms - Clutch  and perform the necessary inspections.
WARNING:

For vehicles equipped with push button start in which a clutch malfunction is suspected, always sit in the driver's seat and firmly apply the brake before starting the vehicle. Do not press the "start" button for any reason from outside the vehicle. A vehicle with a malfunctioning clutch could immediately move when started, which could cause personal injury or property damage.
Internal damage to the clutch master cylinder and the hydraulic system
  1. Inspect for fluid leaks.
  2. Replace the clutch hydraulic system. Refer to Clutch Master Cylinder Replacement , and Hydraulic Clutch Hose/Pipe Replacement (M13) , or Hydraulic Clutch Hose/Pipe Replacement (MJK, MM6) .
  3. Replace the clutch master cylinder and the clutch actuator cylinder (CSC). Refer to Clutch Master Cylinder Replacement , and Clutch Concentric Actuator Cylinder Replacement .
  4. Re-bleed the clutch hydraulic system. Refer to Hydraulic Clutch System Bleeding .
scientia non olet · About LEMON Manuals