Exhaust Manifold Removal

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

NOTE:
In the event that a bolt breaks upon removal of components, perform an extraction of the broken bolt.

Remove the exhaust manifold heat shield bolts (2).
Remove the exhaust manifold heat shield (1).
Courtesy of GENERAL MOTORS COMPANY

Remove the exhaust manifold brace nuts (1) and discard.
Remove the exhaust manifold brace bolts (3).
Remove the exhaust manifold brace (2).
Courtesy of GENERAL MOTORS COMPANY

Remove and discard the exhaust manifold to cylinder head bolts (3).
Remove the exhaust manifold (1).
Remove and discard the exhaust manifold gasket (2).
Clean all of the sealing surfaces.