Removal Procedure

WARNING: This page is about a different variant/trim than selected.

Lower Oil Pan - Remove - Lower Oil Pan Replacement
Courtesy of GENERAL MOTORS COMPANY

Disconnect the oil level sensor electrical connector (1).
Remove the engine oil level sensor fasteners (2).
Courtesy of GENERAL MOTORS COMPANY

Remove the engine oil level sensor C-clip (1).
Push the sensor connector (2) through the oil pan to remove.
Courtesy of GENERAL MOTORS COMPANY

Remove the oil level indicator harness from the retainer (1).
Courtesy of GENERAL MOTORS COMPANY

Remove the engine oil level sensor (1) from the oil pan.