Engine Mount Vacuum Hose Replacement

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Drivetrain and Front Suspension Cradle Removal and Installation (LTG)
1	Engine Mount Vacuum Hose Fastener (Qty: 2) CAUTION: Refer to Fastener Caution . NOTE: Disconnect the vacuum lines from the components. Tighten 9 N.m (80 lb in)
2	Engine Mount Vacuum Hose Procedure Remove the engine mount vacuum tank fastener. Engine Mount Vacuum Tank Replacement . Disconnect the engine mount vacuum hose retainer at the frame. Remove the engine mount vacuum hose assembly from the frame. Remove the vacuum tank and vacuum valves from the engine mount vacuum hose assembly. Remove the vacuum filter from the vacuum hose assembly.

Callout

Component Name

Engine Mount Vacuum Hose Fastener (Qty: 2)

CAUTION:

NOTE:

Disconnect the vacuum lines from the components.

Tighten
9 N.m (80 lb in)

Engine Mount Vacuum Hose

Procedure

Remove the engine mount vacuum tank fastener. Engine Mount Vacuum Tank Replacement .
Disconnect the engine mount vacuum hose retainer at the frame.
Remove the engine mount vacuum hose assembly from the frame.
Remove the vacuum tank and vacuum valves from the engine mount vacuum hose assembly.
Remove the vacuum filter from the vacuum hose assembly.