LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Mechanical - 2.0L (LTG) - Repair Instructions) >> Repair Instructions >> Crankshaft Rear Oil Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. If equipped with an automatic transmission, remove the automatic transmission flex plate. Refer to Automatic Transmission Flex Plate Replacement .
  2. If equipped with an manual transmission, remove the engine flywheel. Refer to Engine Flywheel Replacement .
  3. GM2812543Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do not damage the outside diameter of the crankshaft or chamber with any tool.

    Use a suitable tool to remove the crankshaft rear oil seal (1).