LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Mechanical - 2.0L (LTG) - Repair Instructions) >> Repair Instructions >> Crankshaft Rear Oil Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
GM2812544Courtesy of GENERAL MOTORS COMPANY
  1. Using the (2) EN-51380  Seal Installer, install a NEW crankshaft real oil seal (1).
  2. If equipped with an manual transmission, install the engine flywheel. Refer to Engine Flywheel Replacement 
  3. Install the automatic transmission flex plate. Refer to Automatic Transmission Flex Plate Replacement .
scientia non olet · About LEMON Manuals