LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Mechanical - 2.0L (LTG) - Repair Instructions) >> Repair Instructions >> Camshaft Timing Chain and Tensioner Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the engine front cover. Refer to Engine Front Cover Replacement .
  2. GM2742534Courtesy of GENERAL MOTORS COMPANY

    Remove the upper timing chain guide bolts (2, 3).

  3. Remove the upper timing chain guide (1).
  4. GM2812837Courtesy of GENERAL MOTORS COMPANY

    Timing Chain Tensioner Bolt (1) - Remove [2x]

  5. Timing Chain Tensioner (2) - Remove
  6. Timing Chain Tensioner Gasket (3) - Remove and DISCARD
  7. GM2742539Courtesy of GENERAL MOTORS COMPANY

    Remove the timing chain tensioner pivot arm bolt (1).

  8. Remove the timing chain tensioner pivot arm (2).
  9. GM2742540Courtesy of GENERAL MOTORS COMPANY

    Remove the timing chain guide bolts (1).

  10. Remove the timing chain guide (2).
  11. Fig 1: Identifying Timing Chain
    GM2742543Courtesy of GENERAL MOTORS COMPANY

    Remove the timing chain (1).

  12. GM2742549Courtesy of GENERAL MOTORS COMPANY

    Remove the timing chain oil nozzle (1).

  13. For camshaft timing chain, sprocket, and tensioner cleaning and inspection. Refer to Camshaft Timing Chain, Sprocket, and Tensioner Cleaning and Inspection .