LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine Mechanical - 2.0L (LTG) - Repair Instructions) >> Repair Instructions >> Automatic Transmission Flex Plate Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.

Special Tools

For equivalent regional tools Special Tools

  1. Transmission Replacement (M5T with LTG) - Remove
  2. GM2829399Courtesy of GENERAL MOTORS COMPANY

    To prevent crankshaft rotation, install EN 50792  holding tool (2) and starter motor bolts (1) at the starter motor location and engaging the automatic flex plate.

  3. GM2726718Courtesy of GENERAL MOTORS COMPANY

    Remove the automatic flex plate attaching bolts (1).

  4. Remove the automatic flex plate (2).
  5. Remove EN 50792  holding tool.
  6. For automatic flex plate cleaning and inspection. Automatic Transmission Flex Plate Cleaning and Inspection 
scientia non olet · About LEMON Manuals