Harsh, Soft, Delayed or Slipping First, Second, Third, Fourth, Fifth, or Reverse Shift

WARNING: This page is about a different variant/trim than selected.

Checks	Causes
1-2-3-4-5 Reverse Clutch Assembly	Inspect for damaged or worn 1-2-3-4-5 Reverse clutch plates (592 - 595). Inspect for damaged 1-2-3-4-5 Reverse clutch piston (406), clutch piston dam (402), and return spring (405). Inspect for cut, worn or damaged 1-2-3-4-5 Reverse clutch piston seals (403, 408), piston O-ring seal (404), dam seal (401), and dam inner O-ring seal (409). Inspect for damaged 1-2-3-4-5 Reverse clutch piston dam retaining ring (400). Inspect for damaged or improper selective 1-2-3-4-5 Reverse clutch backing plate retaining ring (590). Inspect for damaged 1-2-3-4-5 Reverse clutch backing plate (591). Inspect for worn splines on backing plate.

Checks

Causes

1-2-3-4-5 Reverse Clutch Assembly

Inspect for damaged or worn 1-2-3-4-5 Reverse clutch plates (592 - 595).
Inspect for damaged 1-2-3-4-5 Reverse clutch piston (406), clutch piston dam (402), and return spring (405).
Inspect for cut, worn or damaged 1-2-3-4-5 Reverse clutch piston seals (403, 408), piston O-ring seal (404), dam seal (401), and dam inner O-ring seal (409).
Inspect for damaged 1-2-3-4-5 Reverse clutch piston dam retaining ring (400).
Inspect for damaged or improper selective 1-2-3-4-5 Reverse clutch backing plate retaining ring (590).
Inspect for damaged 1-2-3-4-5 Reverse clutch backing plate (591). Inspect for worn splines on backing plate.