Actions Taken When the DTC Sets
WARNING: This page is about a different variant/trim than selected.
P2808
DTCs listed in the DTC Descriptor Category = Type B DTC
- Transmission Hot Mode = On
- TCC Control = Disabled
- Transmission Adaptive Pressure Control = Freeze current adapt values
P2809
DTCs listed in the DTC Descriptor Category = Type A DTC
- Autostart/Autostop = Disabled - If equipped
- Line Pressure Command = Reduced
- Neutral Idle Mode = Disabled
- Transmission Hot Mode = On
- TCC Control = Enabled
- Torque Management System Performance - Forced Limited Engine Power = Requested
- Transmission Adaptive Pressure Control = Freeze current adapt values