Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P0182

Fuel Rail Temperature Sensor 1 = Less than a predefined threshold - For greater than 4 s

P0183

Fuel Rail Temperature Sensor 1 = Greater than a predefined threshold - For greater than 4 s

P0187

Fuel Rail Temperature Sensor 2 = Less than a predefined threshold - For greater than 4 s

P0188

Fuel Rail Temperature Sensor 2 = Greater than a predefined threshold - For greater than 4 s

P0191

Fuel Rail Pressure Sensor 2 = Greater than a predefined threshold - For greater than 2. 6 s

P0192

Fuel Rail Pressure Sensor 2 = Greater than a predefined threshold - For greater than 2. 6 s

P111F

The following parameters are not within 10°C (50°F) of each other:

The above condition(s) must occur for greater than 8 s.

P126E

Fuel Rail Temperature Sensor 1 = Greater than the maximum threshold - For greater than 4 s

P126F

Fuel Rail Temperature Sensor 2 = Greater than the maximum threshold - For greater than 4 s

P127C

Fuel Rail Pressure Sensor 2 = Greater than a predefined threshold - For greater than 2. 6 s

P128A

Fuel Rail Pressure Sensor 1 = Greater than a predefined threshold - For greater than 2. 6 s

P128B

Fuel Rail Pressure Sensor 2 = Greater than a predefined threshold - For greater than 2. 6 s

P16E4

Fuel Rail Pressure Sensor Signal = Less than a predefined threshold - For greater than 3. 25 s

P16E5

Fuel Rail Pressure Sensor Signal = Greater than a predefined threshold - For greater than 3. 25 s