Removal Procedure

WARNING: This page is about a different variant/trim than selected.

Set the park brake.
{ If equipped } Transmission Heat Shield - Remove - Transmission Heat Shield Replacement
Fig 1: Identifying Range Selector Lever Cable, Terminal, Shift Lever Pin And Retainer
Courtesy of GENERAL MOTORS COMPANY

Disconnect the transmission range selector lever cable terminal (1) from the transmission manual shift lever pin (6).
Slide the retainer (4) rearward to release the transmission range selector lever cable from the bracket.
Front Floor Lower Console Replacement - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Mark the orientation of the grommet to the floor panel for installation.

Remove the grommet and cable assembly (1) from the floor panel.
Courtesy of GENERAL MOTORS COMPANY

Slide the transmission range selector lever cable retainer forward (1) and remove the transmission range selector cable from the transmission control base.
Disconnect the transmission range selector lever cable terminal (2) from the shift lever pin.
Remove the transmission range selector lever cable from the vehicle.