Range Selector Lever Cable Bracket Replacement (M5T)

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Apply the park brake. Shift the transmission into neutral. Lifting and Jacking the Vehicle (Convertible) Disconnect the range selector lever cable from the bracket and reposition out of the way. Range Selector Lever Cable Replacement
1	Transmission Range Selector Cable Bracket Bolt [ 2x] CAUTION: Refer to Fastener Caution . Tighten 22 N.m (16 lb ft)
2	Transmission Range Selector Cable Bracket

Callout

Component Name

Preliminary Procedures

Apply the park brake.
Shift the transmission into neutral.
Lifting and Jacking the Vehicle (Convertible)
Disconnect the range selector lever cable from the bracket and reposition out of the way. Range Selector Lever Cable Replacement

Transmission Range Selector Cable Bracket Bolt [ 2x]

CAUTION:

Tighten
22 N.m (16 lb ft)

Transmission Range Selector Cable Bracket