Turbocharger Coolant Feed Pipe Replacement (LTG with Y4Q)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Drain the cooling system. Cooling System Draining and Filling (GE 47716) , or Cooling System Draining and Filling (Static Fill) Warm Up Three-Way Catalytic Converter Replacement (LTG)
1	Turbocharger Coolant Feed Pipe Hollow Screw CAUTION: Refer to Fastener Caution . Tighten 35 N.m (26 lb ft)
2	Turbocharger Coolant Feed Pipe Fastener [2x] Tighten 10 N.m (89 lb in)
3	Turbocharger Coolant Feed Pipe Gasket Procedure Install a NEW gasket.
4	Turbocharger Coolant Feed Pipe Hollow Screw Seal [2x] Procedure Install NEW sealing washers.
5	Turbocharger Coolant Feed Pipe