K29F Seat Heating Control Module - Front X2
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | Not Required | J-35616-64B (LT BU) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| II | Not Required | Not Available | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 | 0.35 | BK/YE | 2080 | Driver Heated Seat Thermistor Low Reference | I | KA1 |
| 2 | 0.35 | BK/GY | 2435 | Co-Driver Heated Seat Thermistor Low Reference | I | KA1 |
| 3 | 0.35 | BU | 2425 | Driver Seat Back Heating Temperature Sensor Signal | I | KA1 |
| 4 | 0.35 | WH/BU | 2436 | Passenger Seat Back Heating Temperature Sensor Signal | I | KA1 |
| 5 | 0.35 | WH/GY | 2434 | Passenger Seat Heating Temperature Sensor Signal | I | KA1 |
| 6 | 0.35 | YE/GY | 2079 | Driver Seat Heating Temperature Sensor Signal | I | KA1 |
| 7 | - | - | - | Not Occupied | - | - |
| 8 | - 0.35 |
GN/BU GN/BU |
6133 6133 |
Body Control Module LIN Bus 2 Body Control Module LIN Bus 2 |
II I |
- KA1 |
| 9 | 0.35 | GN/VT | 5906 | Driver Seat Blower Motor Control 1 | I | KA1/KQV |
| 10 | 0.35 | VT/WH | 5908 | Passenger Seat Blower Motor Control 1 | I | KA1+KQV |
| 11 | - | - | - | Not Occupied | - | - |
| 12 | 0.35 | BK/GN | 2482 | Co-Driver Heated Back Thermistor Low Reference | I | KA1 |
| 13 - 16 | - | - | - | Not Occupied | - | - |