LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Power Brake Booster Vacuum Pipe Replacement (LT1) >> Removal Procedure

Removal Procedure

  1. Apply the brake pedal several times until the pedal becomes firm to deplete the power brake booster vacuum reserve.
  2. Disconnect the power brake booster vacuum sensor electrical connector.
  3. Air Cleaner Assembly Replacement (LT1) - Remove
  4. GM4182820Courtesy of GENERAL MOTORS COMPANY

    Power Brake Booster Vacuum Sensor (1) @ Power Brake Booster - Remove

  5. GM4182668Courtesy of GENERAL MOTORS COMPANY

    Power Brake Booster Pump Inlet Pipe Quick Connect (1) - Disconnect

  6. GM4182823Courtesy of GENERAL MOTORS COMPANY

    Retainer (1) - Release

  7. GM4063357Courtesy of GENERAL MOTORS COMPANY

    Retainer (1) - Release

  8. Radiator Air Side Baffle Replacement - Left Side (LT1) - Remove
  9. GM4063110Courtesy of GENERAL MOTORS COMPANY

    Retainer (1) - Release

  10. GM4063114Courtesy of GENERAL MOTORS COMPANY

    Quick Connect Fitting (1) @ Vacuum Pump Assembly - Release

  11. Power Brake Booster Vacuum Pipe - Remove
scientia non olet · About LEMON Manuals