LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Front Brake Hose Replacement (J6M) >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle (Base) , or Lifting and Jacking the Vehicle (ZL1) , or Lifting and Jacking the Vehicle (Convertible)
  2. Remove the tire and wheel assembly. Tire and Wheel Removal and Installation
  3. Front Wheelhouse Splash Shield - Remove - Front Wheelhouse Splash Shield Replacement
  4. GM4007398Courtesy of GENERAL MOTORS COMPANY

    Brake Pipe Fitting (1) - Disconnect

  5. Cap the brake pipe fitting to prevent brake fluid loss and contamination.
  6. GM4007401Courtesy of GENERAL MOTORS COMPANY

    Brake Hose Retainer (1) - Remove

  7. GM4007403Courtesy of GENERAL MOTORS COMPANY

    Wheel Speed Sensor Harness Clip (1) @ Brake Hose - Release [2x]

  8. GM4007404Courtesy of GENERAL MOTORS COMPANY

    Brake Hose Bracket Bolt (1) - Remove

  9. GM4926394Courtesy of GENERAL MOTORS COMPANY

    Brake Hose Fitting Bolt (1) - Remove

  10. GM4926397Courtesy of GENERAL MOTORS COMPANY

    Brake Hose Fitting Gasket (1) @ Front Brake Hose (2) - Remove and DISCARD [2x]

  11. Front Brake Hose - Remove