LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Camaro SS, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim And Paneling >> Repair Instructions >> Windshield Garnish Molding Replacement - Right Side (Convertible)

Windshield Garnish Molding Replacement - Right Side (Convertible)

GM4328341Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Place the folding top assembly in a full down position to allow access to the windshield side garnish molding.
1 Windshield Garnish Molding

Procedure

  1. Starting at the top, gently pull on the garnish molding to disengage the clips.
  2. Disconnect electrical connector.
  3. Garnish clips must be seated in roof front header garnish molding lower prior to installing sealing clips.
  4. Tabs to be fully seated in instrument panel trim pad.
scientia non olet · About LEMON Manuals