Body Side Rear Window Garnish Molding Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures SIR Disabling and Enabling Center Pillar Upper Trim Panel Replacement Remove the rear seat belt retractor anchor bracket fastener. Rear Seat Belt Retractor Replacement (Coupe) , or Rear Seat Belt Retractor Replacement (Convertible)
1	Rear Seat Opening Bezel Procedure Use a plastic trim tool to aid in removal.
2	Body Side Rear Window Garnish Molding Bolt CAUTION: Refer to Fastener Caution . Tighten 3 N.m (27 lb in)
3	Body Side Rear Window Garnish Molding Procedure Use a plastic trim tool to aid in disengaging retaining clips on center pillar upper trim panel from the center pillar inner panel. NOTE: Ensure that webbing remains untwisted when routing webbing through panel.