Preliminary Procedures
Fuel Tank Filler Door Replacement . |
| 1 |
Fuel Tank Filler Pipe Housing Ring
Procedure
Using a flat bladed tool, release the fuel tanks filler housing ring from the housing and slid the tab out from behind the hinge. |
| 2 |
Fuel Tank Filler Pipe Housing Retainer [4x] Procedure
- Using a flat-bladed tool that fits into the 4 depressions, break through the 4 depressions with light pressure and then pry the clips free to release the fuel tank filler pipe housing from the body side outer panel.
- The fuel tank filler pipe housing once removed cannot be reused and must be replaced with a NEW fuel tank filler pipe housing.
|
| 3 |
Fuel Tank Filler Pipe Housing Procedure
- Position the fuel tank filler pipe housing to the body side outer panel and the fuel filler pipe.
- Press the fuel tank filler pipe housing to the body side outer panel until fully seated.
- Ensure the fuel tank filler pipe housing seal is full seated to the filler pipe.
|