Engine Flywheel Removal (Europe)

WARNING: This page is about a different car, the 2019 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Install EN-652 holder, lock the flywheel via the starter ring gear. Special Tools EN-652 Flywheel HolderEquivalent regional tools: Special Tools .
1	Clutch Pressure and Driven Plate Assembly Procedure Remove the Clutch Pressure and Drive Plate Assembly. Refer to Clutch Pressure and Driven Plate Replacement .
2	Engine Flywheel Bolt[8x] NOTE: Discard the bolts.
3	Engine Flywheel
4	Crankshaft Position Sensor Reluctor Ring CAUTION: Refer to Crankshaft Position Sensor Reluctor Ring Caution .