Automatic Transmission Flex Plate Removal (Europe)

WARNING: This page is about a different car, the 2019 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Install EN-652 holder, lock the flywheel via the starter ring gear. Special Tools EN-652 Flywheel HolderEquivalent regional tools: Special Tools .
1	Automatic Transmission Flex Plate Bolt[8x] NOTE: Discard the bolts.
2	Automatic Transmission Flex Plate
3	Crankshaft Position Sensor Reluctor Ring