Rear Seat Belt Buckle Replacement

WARNING: This page is about a different car, the 2019 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the rear seat cushion. Refer to Rear Seat Cushion Removal and Installation (Base) , or Rear Seat Cushion Removal and Installation (60 Percent Seat) , or Rear Seat Cushion Removal and Installation (40 Percent Seat) . In case of split seat (60/40), remove the rear seat center shoulder belt. Refer to Rear Seat Center Shoulder Belt Replacement .
1	Rear Seat Belt Buckle Bolt CAUTION: Refer to Fastener Caution . Tighten 40 N.m (30 lb ft)
2	Rear Seat Belt Buckle Assembly Procedure Disconnect the electrical connectors, if needed.

Callout

Component Name

Preliminary Procedures

Remove the rear seat cushion. Refer to Rear Seat Cushion Removal and Installation (Base) , or Rear Seat Cushion Removal and Installation (60 Percent Seat) , or Rear Seat Cushion Removal and Installation (40 Percent Seat) .
In case of split seat (60/40), remove the rear seat center shoulder belt. Refer to Rear Seat Center Shoulder Belt Replacement .

Rear Seat Belt Buckle Bolt

CAUTION:

Refer to Fastener Caution .

Tighten
40 N.m (30 lb ft)

Rear Seat Belt Buckle Assembly
Procedure
Disconnect the electrical connectors, if needed.