Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
Assemble the New positive crankcase ventilation tube (2) with air cleaner outlet duct assembly (1) and New positive crankcase ventilation valves (3).
Install the positive crankcase ventilation tube (2) with air cleaner outlet duct assembly (1) and valve (3) to the engine.
- Using EN-50956 tamper proof drive bit tighten bolts (4) to 10 N.m (89 lb in).
Position the air cleaner outlet duct (1) in place and tighten the clamp (2) on the engine.
- Install the positive crankcase ventilation tube (front).