LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Volt Premier >> Repair and Diagnosis >> External Pages >> Different car >> Section 381 (Engine Mechanical - 1.0L (L5Q) Or 1.4L (LV7) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Engine Oil Level Indicator Control Module Wiring Harness Replacement (L5Q) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4499155Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Engine Oil Level Indicator Control Module Wiring Harness - Install and tighten10N.m (89 lb in)

  2. GM4499154Courtesy of GENERAL MOTORS COMPANY

    Connect the engine oil level indicator control module wiring harness connector (1) to the engine oil level indicator control module wiring harness (2).

  3. GM4499156Courtesy of GENERAL MOTORS COMPANY

    Crankshaft Oil Deflector(3) - Install

  4. Crankshaft Oil Deflector Bolt(1)[3x]Tighten in sequence10N.m (89 lb in)
  5. Crankshaft Oil Deflector Bolt(2)[2x]Tighten in sequence25N.m (18 lb ft)
  6. Oil Pan Replacement (L5Q)  - Install