Camshaft Position Sensor Replacement (LV7)

WARNING: This page is about a different car, the 2019 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (LV7) . Disconnect the camshaft position sensor connectors.
1	Camshaft Position Sensor Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Procedure Remove the camshaft position sensor bolts. Tighten 10 N.m (89 lb in)
2	Camshaft Position Sensor (Qty: 2)

Callout

Component Name

Preliminary Procedures

Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection
Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (LV7) .
Disconnect the camshaft position sensor connectors.

Camshaft Position Sensor Bolt (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Procedure
Remove the camshaft position sensor bolts.
Tighten
10 N.m (89 lb in)

Camshaft Position Sensor (Qty: 2)