Fastener Specifications
WARNING: This page is about a different car, the 2019 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
| Application |
|---|
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
| Front Brake Hose Washer |
Reusable Threaded Fastener Tightening Specifications
| Application | Specification |
|---|---|
| Metric (English) | |
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
| Brake Master Cylinder Nuts | 13 N. m (115 lb in) |
| Brake Master Cylinder Reservoir Bracket Nuts | 9 N. m (80 lb in) |
| Brake Pressure Modulator Valve Primary Pipe Fitting | 18 N. m (13 lb ft) |
| Brake Pressure Modulator Valve Secondary Pipe Fitting | 18 N. m (13 lb ft) |
| Brake, Accelerator and Clutch Pedal Bracket Nuts | 22 N. m (16 lb ft) |
| Front Brake Hose Fitting Banjo Bolt | 40 N. m (30 lb ft) |
| Front Brake Pipe Fitting | 18 N. m (13 lb ft) |
| Rear Brake Pipe Fitting | 18 N. m (13 lb ft) |
| Rear Brake Rear Pipe Fitting | 18 N. m (13 lb ft) |