Installation Procedure
WARNING: This page is about a different car, the 2018 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
Release the tension using the suitable tool.
- NOTE:
Oil pump is removed/installed as an assembly with the oil pump sprocket.
Install the oil pump (2) with 2 oil pump gasket (3).
- Tighten the oil pump bolts (1) in crisscross sequence to 10 N.m (89 lb in).
- Install the upper oil pan. Refer to Upper Oil Pan Replacement (LV7) .
CAUTION:
Refer to Fastener Caution .