Removal Procedure
WARNING: This page is about a different car, the 2018 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the hydraulic valve lash adjuster arm. Refer to Hydraulic Valve Lash Adjuster Arm Replacement .
- NOTE:
Many internal engine components will develop specific wear patterns on their friction surfaces.
Components MUST be separated, marked, or organized in a way to ensure installation to their original location and position. Take precautions in order to prevent interchanging of parts.
- Tag or mark each part immediately when removed. Indicate location, direction, or orientation when necessary.
- Remove the 12 hydraulic valve lash adjusters (1).