Installation Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Engine Oil Level Indicator Control Module Wiring Harness - Install and tighten to 10 N.m (89 lb in)
Courtesy of GENERAL MOTORS COMPANY

Connect the engine oil level indicator control module wiring harness connector (1) to the engine oil level indicator control module wiring harness (2).
Fig 1: Identifying Crankshaft Oil Deflector And Bolts With Tightening Sequence
Courtesy of GENERAL MOTORS COMPANY

Crankshaft Oil Deflector (3) - Install
Crankshaft Oil Deflector Bolt (1) [3x] Tighten in sequence to 10 N.m (89 lb in)
Crankshaft Oil Deflector Bolt (2) [2x] Tighten in sequence to 25 N.m (18 lb ft)
Oil Pan Replacement (L5Q) - Install