Removal Procedure
WARNING: This page is about a different car, the 2018 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
- Open the hood
 Courtesy of GENERAL MOTORS COMPANY
|
Unclip the wiring harness retainer (1, 2, 3).
 Courtesy of GENERAL MOTORS COMPANY
|
Remove the engine wiring harness bracket bolt (1) and remove the engine wiring harness bracket (2).
 Courtesy of GENERAL MOTORS COMPANY
|
Remove the engine lift rear bracket bolts (1).
- Remove the engine lift rear bracket (2).