LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Volt Premier >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (Engine Mechanical - 1.0L (L5Q) Or 1.4L (LV7) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Crankshaft Position Sensor Reluctor Ring Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM3763326Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Crankshaft Position Sensor Reluctor Ring Caution .

    Install the crankshaft position sensor reluctor ring (2).

  2. Install the pin (3) into the correct hole (1).
  3. Install the engine flywheel. Refer to Engine Flywheel Replacement .
scientia non olet · About LEMON Manuals