Removal Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
Courtesy of GENERAL MOTORS COMPANY

NOTE:
The engine can be equipped with two different front oil seal designs.

Check which one of crankshaft front oil seals (1, 2) is installed.
Courtesy of GENERAL MOTORS COMPANY

Install the DT-6125-1B hammer (2) to DT-23129 remover (3).
Install the DT-6125-1B hammer with the DT-23129 remover behind the crankshaft front oil seal (1).
Remove the crankshaft front oil seal (1), with the DT-6125-1B hammer.