Starter Replacement (without Start/Stop)

WARNING: This page is about a different car, the 2018 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection . Raise the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the exhaust muffler. Refer to Exhaust Muffler Replacement (L5Q)Exhaust Muffler Replacement (LV7) . Disconnect the connector. Remove the generator B (+) Nut.
1	Starter Solenoid B (+) Nut CAUTION: Refer to Fastener Caution . Procedure Remove the starter solenoid B (+) nut. Tighten 12.5 N.m (111 lb in)
2	Starter Retaining Bolt (Qty: 2) Procedure Remove the starter retaining bolts. Tighten 58 N.m (43 lb ft)
3	Starter Procedure Transfer parts as necessary.