Starter Replacement (LV7)

WARNING: This page is about a different car, the 2018 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection . Raise the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the exhaust muffler. Refer to Exhaust Muffler Replacement (LV7) . Disconnect the connector. Remove the generator B (+) Nut.
1	Starter Retaining Nut CAUTION: Refer to Fastener Caution . Procedure Remove the starter retaining nut. Tighten 58 N.m (43 lb ft)
2	Starter Solenoid B (+) Nut Procedure Remove the starter solenoid B (+) nut. Tighten 17 N.m (13 lb ft)
3	Starter Retaining Bolt Procedure Remove the starter retaining bolt. Tighten 58 N.m (43 lb ft)
4	Engine Wiring Harness Ground Bolt Procedure Remove the engine wiring harness ground bolt. Tighten 22 N.m (16 lb ft)
5	Starter Procedure Transfer parts as necessary.