Battery Tray Replacement (without Engine Block Heater)

WARNING: This page is about a different car, the 2018 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the battery. Refer to Battery Replacement . Remove the ECM. Refer to Engine Control Module Replacement .
1	Battery Tray Retaining Bolt (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten 11.5 N.m (102 lb in)
2	Battery Tray Procedure Unclip the retainers from the battery tray. Remove the electrical connector. Remove the battery tray.

Callout

Component Name

Preliminary Procedures

Remove the battery. Refer to Battery Replacement .
Remove the ECM. Refer to Engine Control Module Replacement .

Battery Tray Retaining Bolt (Qty: 3)

CAUTION:

Refer to Fastener Caution .

Tighten
11.5 N.m (102 lb in)

Battery Tray

Procedure

Unclip the retainers from the battery tray.
Remove the electrical connector.
Remove the battery tray.